FINANCING AVAILABLE
These are instructions for installing the clip-on version of our Trap Cap. You may also find this information on page 10 in the Pig Brig User Guide you received with your trap purchase.
Attach the Trap Cap by pulling the outer border rope at each hog ring over each T-post mount and inside the hook on the hooked cam strap. Both outer ends at the seam should overlap the same T-post as the Base Net does at its seam. Connect the ends of the netting to finalize the seam, similar to the Net’s seam, using the 3” carabiners. The Trap Cap seam should NOT be on the same T-post as the Base Net seam. Connect the Trap Cap carabiners on the outer border rope to the Base Net’s top border rope between each T-post.